C 27 SPECIFICATIONS

SUPERIOR PERFORMANCE:
Higher lift capacity: Handle larger implements…Get work done a lot faster.
Heavy-duty components: Tough and rugged…Keep right on performing day after day.
Sturdier chassis: Greater stability…Keeps you safe while handling rigorous work.
Heavier chassis: Additional weight…Provides extra traction.
C27 SPECIFICATIONS
ENGINE - MDI1895COM
Type : Four stroke, direct injection, water-cooled diesel
Cylinders : 3
Engine HP (kW) @ RPM : 27 (20) @ 2100
Compression Ratio : 19:1
Displacement : Cubic inch (cc): 115 (1891)
ELECTRICAL
Battery Capacity : 12 volt, 96 amp hours
Alternator : 12 volt, 36 amps
CLUTCH
Type : Single
TRANSMISSION
Type : Partial Constant Mesh
Number of Gears : 8 forward, 2 reverse
FRONT WHEEL DRIVE
Type :
STEERING
Type : Hydrostatic power
Pump Output (gallons/minute) :
BRAKES
Type : Fully enclosed dry disc
HYDRAULIC SYSTEM
Type : Independent, full-live hydraulic with position and draft controls
Pump Output (gallons/minute) : 7
3-Point Linkage : Category 1 and 2 adjustable with telescopic check chains
Lift Capacity (Ibs) : 3520
PTO
Type : Transmission with internal over-running clutch
PTO RPM : 540 at 1980 engine rpm
PTO HP (kW) : 22 (16)
OPERATING WEIGHT
Total (Ibs) : 3630
DIMENSIONS
Overall Length Inches (mm) : 104 (2641)
Overall Width Inches (mm) : 53.8 (1366)
Turning Radius Minimum (mts) : 7.91 (2.4)
  Specifications and design subject to change without notice. ©2002 Mahindra USA. MAH-031802