MAHINDRA 4110 SPECIFICATIONS

4110 SPECIFICATIONS 4110
ENGINE4A200
Type : Four stroke, indirect injection,
water-cooled, diesel
Cylinders : 4
Engine HP (kW) @ RPM :41 (30.6) @ 2700
Compression Ratio :21:1
Displacement : ci (cc)122 (2000)
ELECTRICAL
Battery Capacity : 12 volt, 110 amp hours
Alternator : 12 volt, 50 amps
CLUTCH
Type : Single plate, dry
TRANSMISSION
Type : Forward Reverse Syncro-Shuttle w/partial syncro speed
Number of Speeds : 12 forward, 12 reverse
FRONT WHEEL DRIVE
Type : Mechanical
STEERING
Type : Hydrostatic power
Pump Output (gallons/minute) : 4.64
BRAKES
Type : Wet disc
HYDRAULIC SYSTEM
Type : Open Center,full-live hydraulic with position & draft control
Pump Output (gallons/minute) : 7.87
3-Point Linkage : Category 1 with check chains
Lift Capacity (Ibs) : 2865
Auxiliary Remote Valves : 1 standard
PTO
Type : Independent rear PTO w/safety mechanism & electro-hydraulic clutch
PTO RPM : 540 / 1000
Mid PTO RPM : N/A
PTO HP (kW) : 33.6 (25.1)
OPERATING WEIGHT
Total (Ibs) : 3969
DIMENSIONS
Overall Length Inches (mm) :139 (3531)
Overall Width Inches (mm) : 58.7 (1490)
Turning Radius / Feet (mts) : 10.17 (3.1)
Tires sizes and options
AG (front / rear) : 9.5x16 / 14.9X24
Industrial (front / rear) : 12x16.5 / 17Lx24
Turf (front / rear)12x16.5 / 16.9x24
click here for LOADER SPECS.
Specifications and design subject to change without notice.

www.NewEnglandTractor.com
A Division of Johnson Automotive Inc. 82 Old Amity Rd. Bethany, CT 06524
Phone: 203-393-0642 or
Toll Free 1-866-393-0642