3505-DI SPECIFICATIONS

SUPERIOR PERFORMANCE:
Higher lift capacity: Handle larger implements…Get work done a lot faster.
Heavy-duty components: Tough and rugged…Keep right on performing day after day.
Sturdier chassis: Greater stability…Keeps you safe while handling rigorous work.
Heavier chassis: Additional weight…Provides extra traction.
3505-DI SPECIFICATIONS
ENGINE - MD11895E
Type : Four stroke, direct injection, water-cooled, diesel
Cylinders : 3
Engine HP (kW) @ RPM : 35.0 (26.0) @ 2300
Compression Ratio : 19:1
Displacement : Cubic inch (cc):115 (1891)
Cylinder Sleeve : Wet replaceable
ELECTRICAL
Battery Capacity : 12 volt, 88 amp hours
Alternator : 12 volt, 36 amps
CLUTCH
Type : Dual
TRANSMISSION
Type : Sliding Mesh
Number of Gears : 8 forward, 2 reverse
STEERING
Type : Hydrostatic power
BRAKES
Type : Fully enclosed dry disc
HYDRAULIC SYSTEM
Type : Independent,full-live hydraulic pump with draft and position control
Pump Output (gallons/minute) : 8.3
3-Point Linkage : Category 1and 2 adjustable with telescopic check chains
Lift Capacity (Ibs) : 3525
PTO
Type : CRPTO (Constant running power take-off)
PTO RPM : 540 @ 1980 engine rpm
PTO HP (kW) : 27.0 (20.0)
OPERATING WEIGHT
Total (Ibs) : 3900
DIMENSIONS
Overall Length Inches (mm) : 111.5 (2832)
Overall Width Inches (mm) : 64.4 (1636)
Turning Radius Minimum (mts) : 2.9
  Specifications and design subject to change without notice. ©2002 Mahindra USA. MAH-031802