MAHINDRA 20 SERIES 2wd SPECIFICATIONS

20 SERIES 2WD SPECIFICATIONS 7520 2wd
ENGINE NE475TC
Type : Four stroke, direct injection, water-cooled, diesel
Cylinders : 4
Engine HP (kW) @ RPM : 75 (55.9) @ 2300
Compression Ratio : 18.4:1
Displacement : ci (cc) 194.7 (3192)
ELECTRICAL
Battery Capacity : 12 volt, 925 CCA
Alternator : 12 volt, 45 amps
CLUTCH
Type : Dual dry with cerametallic lining
TRANSMISSION
Type : Forward-Reverse Synchro-Shuttle with full synchromesh
Number of Speeds : 12 forward, 12 reverse
STEERING
Type : Hydrostatic power w/tilt
Pump Output (gallons/minute) : 5.2
BRAKES
Type : Wet Disc
HYDRAULIC SYSTEM
Type : Open Center,full-live hydraulic with position & draft control
Pump Output (gallons/minute) : 17
3-Point Linkage : Category 2 with telescopic lower link & stabilizers
Lift Capacity (Ibs) : 5500
Auxiliary Remote Valves : 2 spool std w/2 position detent & float
PTO
Type : Independent
PTO RPM : 540 & 1000
PTO HP (kW) : 65 (48.5)
OPERATING WEIGHT
Total (Ibs) : 7100
DIMENSIONS
Overall Length Inches (mm) : 157.5 (4004)
Overall Width Inches (mm) : 76.5 (1944)
Turning Radius / Feet (mts) : 10.5 (3.2)
Tires sizes and options
AG (front / rear) : 11Lx15 / 16.9x30
click here for LOADER SPECS.
Specifications and design subject to change without notice.

www.NewEnglandTractor.com
A Division of Johnson Automotive Inc. 82 Old Amity Rd. Bethany, CT 06524
Phone: 203-393-0642 or
Toll Free 1-866-393-0642